Archive for September, 2010

USB Input Device: New firmware software

USB Input Device: New firmware and software
We have improved the USB-Input-Device software and firmware.

The most significant innovations are the commands get pattern and set counter.

Retrieves the digital input state as pattern with Get pattern. The current input state must have not changed.
Set counter allows to set the counter to a desired value. Counting starts from this value.

Both functions can be used as a direct command or with the new configuration tools.

In addition, other innovations have been introduced. Here is a short list:

Log Communication

Log Communication

Customized item logging into a file LogFile.txt (Log to File) is possible, now.

Get Pattern / Event Filter

Get Pattern / Event Filter

With Get Pattern the pattern status for all digital inputs can be retrieved manually.
In addition, with "Event Filter" update messages of individual digital inputs can be specifically excluded.

GetStateBit

GetStateBit

The state of a digital input can be requested specifically with the buttons GetStateBit0 … GetStateBit5.

Set Counter

Set Counter

With "Set to Counter", the counter can be set to a desired value.

Temperatures Start/Stop

Temperatures Start/Stop

Interrupt the cyclic transmission of a temperature value with the Stop button. With the Start button the temperature value is again transferring cyclically.
For example, if the transmission cycle is 10 minutes and only one minute of the cycle has passed, click start/stop and do not wait nine minutes to get a new temperature value.

More information on the USB Input Device >>

Support / Download area >>