Archive for May, 2012

USB Floppy Format Tool for Windows 7 32/64Bit

USB Floppy Format Tool for the Foppy-Emulator V2The ipcas Floppy-Emulator V2 supports up to 100 disks per USB pen drive. The (virtual) floppy disks can be easily selected via the up-/down-buttons of the emulator, and the LED display shows which disc is currently loaded. If you want to use up to 100 floppy disks per pen drive, the USB pen must be formatted specifically. The formatting can be done with the "USB Floppy Format Tool". If only one floppy disk per USB pen should be used, no software is required.

Now the new "USB Floppy Format Tool for the Floppy Emulator V2" is also suitable for the following operating systems:

  • Windows 7, 32-/64-Bit
  • Windows Vista, 32-/64-Bit
  • Windows Server 2008, 32-/64-Bit
  • Windows Server 2003, 32-/64-Bit

The "USB Floppy Format Tool" in Version 1.31t is now available for download at the support area and on the product page. A revised manual is included in the package.

More information about the ipcas Floppy-Emulation solutions >>

 

Simple GUI software for the universal I/O-Box

To help you get started using the I/O Box, we have developed a simple application.
The capabilities of the I/O Box are very extensive. The simple GUI tool uses the basic functionality of the box.
With this tool, you can now handle values ​​or set signal states in no time.

generalinputoutputanalogpt100communication

 

Of course, we will also develop custom software to your needs.

The ipcas I/O Box is extremely flexible. The modular design allows easy adaptation to your individual needs. Digital and analog input and output modules are available for configuration as well as a PT100 module.
The Box communicates via USB and Ethernet.

The simple GUI tool is now available for download on the product page and at the support area.