Archive for the ‘Ethernet Converter’ Category

Interface converter: new configuration tool for ipEther232 products available

ipether232 Configtool version 15.6
The new configuration tool version 15.6 for products of the ipEther232 product family is now available for download.

Supported Operating Systems: Windows Server2003/7/Server2008 (x86 and x64), Windows Server 2008 R2 (x64)

The configuration tool is suitable for the following products:
ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

In addition, the configuration tool "Light" has been improved.

Furthermore, the "Wireshark protocol decoder" for ipEther232 (Virtuelelr COM port) and ipEther232.Modem (ethernet modem) has been extended.

The configuration tool, the latest firmware and the Wireshark protocol decoders can be downloaded on the respective product websites and in the support area section.

Hardware products »
ipcas product support »

Wireshark protocol decoder for interface converter ipEther232 and ipEther232.Modem

In addition to the new Configtool Version 15.5 we have released version 1.1 of the Wireshark protocol decoder.

The ipEther decoder plugin for Wireshark simplifies the communication analysis for the Virtual-COM-Port (ipEther232) and the Ethernet-Modem (ipEther232.Modem).

Wireshark protocol decoder CMWireshark protocol decoder TM

Furthermore, we released a light version of the configtool. This can be run without installation to set the IP address and the device name.

All downloads are available now in the support area and on the product pages.

ipEther232 Configtool Update – Version 15.3 is available now

For the products of ipEther232 family is now the revised configuration tool available for download. It can be downloaded on the respective product websites and in the support area section.

The following operating systems are supported:

  • Windows Server 2003/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

In addition to many smaller improvements have been mainly the communication in compatibility mode (Compatibility Mode) greatly expanded.

The configuration tool is suitable for the following ipcas products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

New Configtool Version 15.1 for 32-bit and 64-bit Windows systems


The configuration tool for products of the ipEther232 family has been thoroughly revised and is now available for download on the respective product websites and in the support section.

Certified Windows drivers enable the installation under

  • Windows XP with ServicePack 3 (32-Bit)
  • Windows Server 2003/Vista/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

Apart from some corrections, the main focus was to improve and enhance the 64-bit driver for ipEther232.

The configuration tool is available for the following products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

embedded world 2011: minimal video tour on ipcas stand 129 in hall 9

Visit us today and tomorrow, Nuremberg Trade Fair Center (Messezentrum Nürnberg)

Embedded World 2010
Thank you very much for your visit!

 

We would like to thank all visitors cordially who came to our booth at the Embedded World 2010 Trade Fair in Nuremberg.

We are happy you got the opportunity to contact us personally to have a first-hand look at our new innovative products.

All our products are uniquely convincing by virtue of their extraordinary versatility, compact rugged design, high functionality and easy integration.

Please contact us to get more information on our products and customized hardware and software development.

We will meet your challenges and would be glad to implement your projects to your best advantage.

View photos of the ipcas booth at “Embedded World”:

Messezentrum Nürnberg Messezentrum Nürnberg Messezentrum Nürnberg Messezentrum Nürnberg

More photos are available on flickr.

Our complete Hardware Product range >>

Visit us at embedded world 2010

embedded-world-2010-stand-555-hall-12We will be more than glad to support you with first-hand information on our highly innovative Hardware and Software products and concepts.

We would be happy to see you and give you a live display of our produce from March 2 to 4, 2010 at Stand 555 in Hall 12 in the Nuremberg Trade Fair Center.

 

 

Some pictures from our last year’s exhibition stand:

ipcas - embedded world 2009ipcas - embedded world 2009ipcas - embedded world 2009ipcas - embedded world 2009: Famousipcas - embedded world 2009: Metering.Networkipcas - embedded world 2009: USB Floppy Emulatoripcas - embedded world 2009ipcas - embedded world 2009ipcas - embedded world 2009: Centronics USB Converteripcas - embedded world 2009: Ethernet-Terminalipcas - embedded world 2009ipcas - embedded world 2009: Productsipcas - embedded world 2009: Printing-Solutionipcas - embedded world 2009: Printing-Solutionipcas - embedded world 2009: Printing-Solution