Posts Tagged ‘ipEther232’

Interface converter: new configuration tool for ipEther232 products available

ipether232 Configtool version 15.6
The new configuration tool version 15.6 for products of the ipEther232 product family is now available for download.

Supported Operating Systems: Windows Server2003/7/Server2008 (x86 and x64), Windows Server 2008 R2 (x64)

The configuration tool is suitable for the following products:
ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

In addition, the configuration tool "Light" has been improved.

Furthermore, the "Wireshark protocol decoder" for ipEther232 (Virtuelelr COM port) and ipEther232.Modem (ethernet modem) has been extended.

The configuration tool, the latest firmware and the Wireshark protocol decoders can be downloaded on the respective product websites and in the support area section.

Hardware products »
ipcas product support »

Wireshark protocol decoder for interface converter ipEther232 and ipEther232.Modem

In addition to the new Configtool Version 15.5 we have released version 1.1 of the Wireshark protocol decoder.

The ipEther decoder plugin for Wireshark simplifies the communication analysis for the Virtual-COM-Port (ipEther232) and the Ethernet-Modem (ipEther232.Modem).

Wireshark protocol decoder CMWireshark protocol decoder TM

Furthermore, we released a light version of the configtool. This can be run without installation to set the IP address and the device name.

All downloads are available now in the support area and on the product pages.

New configuration software for ipEther232 products – version 15.4

We have improved the configuration software for our ipEther232 products again.
Version 15.4 is now available for download and can be downloaded on the respective product websites and in the support area section.

virtual COM-Port Server - ipether232

The ipEther232-Configtool is suitable for the following products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

ipEther232 Configtool Update – Version 15.3 is available now

For the products of ipEther232 family is now the revised configuration tool available for download. It can be downloaded on the respective product websites and in the support area section.

The following operating systems are supported:

  • Windows Server 2003/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

In addition to many smaller improvements have been mainly the communication in compatibility mode (Compatibility Mode) greatly expanded.

The configuration tool is suitable for the following ipcas products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

New Configtool Version 15.1 for 32-bit and 64-bit Windows systems


The configuration tool for products of the ipEther232 family has been thoroughly revised and is now available for download on the respective product websites and in the support section.

Certified Windows drivers enable the installation under

  • Windows XP with ServicePack 3 (32-Bit)
  • Windows Server 2003/Vista/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

Apart from some corrections, the main focus was to improve and enhance the 64-bit driver for ipEther232.

The configuration tool is available for the following products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

New firmware and driver for ipEther232

Firmware and drivers of our virtual COM-Port
ipEther232 have been updated.

Virtual COM-Port ipEther232: Firmware update
On the product and support page the 32-bit drivers (version 14.03) for ipEther232 and the current firmware (version 12.3) are now available for download.

Firmware 14.03: A small bug with the RS485 two-wire communication was fixed.

The firmware 14.03 can be used with the configtool version 12 as well as with version 14.

For older ipEther232 versions, please take a look at the firmware update page.