Posts Tagged ‘Windows 7’

USB Floppy Format Tool for Windows 7 32/64Bit

USB Floppy Format Tool for the Foppy-Emulator V2The ipcas Floppy-Emulator V2 supports up to 100 disks per USB pen drive. The (virtual) floppy disks can be easily selected via the up-/down-buttons of the emulator, and the LED display shows which disc is currently loaded. If you want to use up to 100 floppy disks per pen drive, the USB pen must be formatted specifically. The formatting can be done with the "USB Floppy Format Tool". If only one floppy disk per USB pen should be used, no software is required.

Now the new "USB Floppy Format Tool for the Floppy Emulator V2" is also suitable for the following operating systems:

  • Windows 7, 32-/64-Bit
  • Windows Vista, 32-/64-Bit
  • Windows Server 2008, 32-/64-Bit
  • Windows Server 2003, 32-/64-Bit

The "USB Floppy Format Tool" in Version 1.31t is now available for download at the support area and on the product page. A revised manual is included in the package.

More information about the ipcas Floppy-Emulation solutions >>

 

ipEther232 Configtool Update – Version 15.3 is available now

For the products of ipEther232 family is now the revised configuration tool available for download. It can be downloaded on the respective product websites and in the support area section.

The following operating systems are supported:

  • Windows Server 2003/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

In addition to many smaller improvements have been mainly the communication in compatibility mode (Compatibility Mode) greatly expanded.

The configuration tool is suitable for the following ipcas products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

New Configtool Version 15.1 for 32-bit and 64-bit Windows systems


The configuration tool for products of the ipEther232 family has been thoroughly revised and is now available for download on the respective product websites and in the support section.

Certified Windows drivers enable the installation under

  • Windows XP with ServicePack 3 (32-Bit)
  • Windows Server 2003/Vista/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

Apart from some corrections, the main focus was to improve and enhance the 64-bit driver for ipEther232.

The configuration tool is available for the following products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server