Posts Tagged ‘Windows’

ipEther232 Configtool Update – Version 15.3 is available now

For the products of ipEther232 family is now the revised configuration tool available for download. It can be downloaded on the respective product websites and in the support area section.

The following operating systems are supported:

  • Windows Server 2003/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

In addition to many smaller improvements have been mainly the communication in compatibility mode (Compatibility Mode) greatly expanded.

The configuration tool is suitable for the following ipcas products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server

Floppy Emulator V3 Manual and Data Sheet revised / Floppy Emulator Image Tool available for Windows, Mac OS X and Linux

Floppy Emulator V3 Data Sheet / Manual

Data Sheet / Manual

The manual and datasheet of the Floppy Emulator V3 have been improved. Now both are available for download in the support area and on the product page.

FEI-Tool (Floppy Emulator Image Tool)

Floppy Emulator Image Tool for Mac OS X, Linux und Windows

For access to floppy emulator images on PC/Mac, the FEI-Tool is required.

In order to achieve maximum operating system compatibility, now the Floppy Emulator Image Tool (FEI-Tool) is available for all major operating systems: Windows, Mac OS X and Linux.
The console application FEI-Tool allows access to files in a Floppy Emulator Image (FEI) as created or changed by the ipcas Floppy Emulator V3.
The Floppy Emulator V3 itself works operating system independent.
In addition there is a Pre-Formatted 1.44 MB DOS Floppy-Image in the support area.

Floppy Emulator V3 product page >>
Floppy Emulator V3 – Support and Downlaod area >>

New Configtool Version 15.1 for 32-bit and 64-bit Windows systems


The configuration tool for products of the ipEther232 family has been thoroughly revised and is now available for download on the respective product websites and in the support section.

Certified Windows drivers enable the installation under

  • Windows XP with ServicePack 3 (32-Bit)
  • Windows Server 2003/Vista/7/Server2008 (32-Bit and 64-Bit)
  • Windows Server 2008 R2 (64-Bit)

Apart from some corrections, the main focus was to improve and enhance the 64-bit driver for ipEther232.

The configuration tool is available for the following products:

ipEther232Virtual COM port
ipEther232.ModemEthernet Modem
ipEther232.PPPPPP – Gateway
ipEther232.IOI/O Data logger / Event logger
ipNTPNTP time server