Distributor wanted for the USA
  english
Home IT-Solutions Hardware Software About us Support Shop
 
Print

 ipEther232.PPP - the PPP Gateway

ppp gateway / terminal server












Fig. 1: ipEther232.PPP

The PPP / Ethernet Converter ipEther232.PPP enables the transmission of network packets via serial interface to and from the Ethernet (PPP = Point to Point Protocol).


"Being networked" has become a global standard. Since most devices are already equipped with an RS232 interface, the PPP Converter offers a cost-effective and quick solution for exchanging TCP/IP frames with the network via serial interface. By using a PPP Converter you can upgrade your equipment and thus save its value for futher system generations.

   
Support ipEther232.PPP
Data Sheet
Manual
Software
RS232 (serial) Tools
References
FAQ
Shop


Combine our products with a WirelessLAN or dLAN environment.

Application

ipEther232.PPP allows you to connect all TCP/IP devices with only an RS232 interface to the Ethernet network, to the Internet, or your company Intranet. The PPP Gateway is an operating system-independent solution which is compatible with existing PPP applications. Several services such as ftp, telnet, www, ssh, rsh, rcp, etc. can be started simultaneously through this transparent network connection. An upgrade with the PPP Converter may significantly enhance the value of your product, and help you to prepare your system for the future.

(1) One Ethernet for All
serial devices into the ethernet
 
(2) Simple network routing
simple network routing - TCP/IP - PPP ethernet
(3) Dial in
simple PPP gateway dial in


Specifications

ipEther232.PPPOEM VersionDesktopDIN-Rail Unit
Interfaces ipEther232.PPP Optional 1 x RS232 - SUB-D9 (full RS232)
• Baud rate: 2.400 to 115.200 bauds
• Parity: None, Even, Odd, Mark, Space
• Data: 8 bits
• Stop: 1 or 2 bits
1 x 10BaseT - RJ45 (may be operated in 10/100 MBit/s networks)
Diagnostics (LED) Power
System
Error
RS232 Send/Receive
Ethernet Send/Receive/Link
Supply voltage + 8-14 V DC input jack
5 V DC on-board connector
+ 8-14 V DC input jack + 8-14 oder 24 V DC1)
input jack and
3.5mm on-board connector
Case Without case Plastic case Plastic case
Measurements W/H/D Approax. 100/20/70 mm Approx. 110/30/75 mm Approax. 45/108/73 mm
Operating/Storage temperature 5° C to 55° C / -10° C to 70° C
Relative humidity 5 % to 90 %, non-condensing
Standards CE
Scope of supply ipEther232.PPP
Without power supply Power supply 2)
Input: 230 V AC
Output: + 9 V DC
Without power supply
Configuration software
Driver for Windows (NT, 2000, XP)
Documentation on CD (German or English)
Purchase order number RS232 0202016-OEM 0202016 0202016-H
Pricing in EUR plus VAT On request 179.00 9 V DC: 228.00
24 V DC: 279.00
60 V DC: 299.00
--> Shop

1)Further voltages on request
2) Delivery to countries with 230 V AC 50Hz only.
(*) Note: Supplied without power pack. Compatible power packs are available at "RadioShack" (e.g.):
Catalog #: 273-1767 (or comparable product).
Subject to change without prior notice
 
<<
↑
 
 
Contacts Imprint GTCT Disclaimer Copyright Protection of data privacy Sitemap


Copyright 1988 - 2008 ipcas GmbH