ipEther232.PPP

Questions about the PPP gateway ipEther232.PPP

How can I make a serial device Ethernet able (TCP/IP-able)?

How can I make a serial device Ethernet-capable (TCP/IP-capable)?

You can do this with an ipEther232.PPP. Here you must configure PPP (under Linux: pppd; under Windows: Telecommunications connection).

P.S.: If only the serial device can be accessed, you may also use an ipEther232 (virtual Com port) instead.

Is it possible to handing over ipEther232.PPP the announcing information (username and password)?

Is it possible to hand over ipEther232.PPP the announcing information (username and password)?

No, password examinations such as PAP or Chap are momentarily yet not supported by ipEther232.PPP.

Can I connect two networks with your products?

Can I connect two networks with your products?

Yes, with two ipEther232.PPP which steer a simple routing via GSM, ISDN, or analog modems.

Contact

embedded world 2010: We exhibit: Hall 12.0, Stand 555 - 2.-4.3.2010

Contacts Imprint GTCT Disclaimer Copyright Protection of data privacy Sitemap